Cura
-
Cura Tree Support Settings: PLA Setup and Fixes
Set Cura tree supports for PLA with documented starting values, then tune contact gaps, branch density, and adhesion for cleaner support removal.
-
Cura vs PrusaSlicer: Which One Fits Your Printer?
Cura and PrusaSlicer come from separate codebases, so settings do not map one to one. A translation table, the real gaps, and which one suits your machine.
-
Best Slicer for Ender 3 in 2026: Model-by-Model Guide
Compare OrcaSlicer, Cura, Creality Print, and PrusaSlicer for the original Ender 3, V2, V3 SE, and V3 KE, with model-specific recommendations.
-
How to Fix Stringing in Cura: Retraction/Temperature/Travel
Stringing in Cura comes from ooze during travel moves. Fix it with retraction distance, temperature, and combing mode, tuned for direct drive or Bowden.
-
Best Cura Settings for PETG: Exact Values, Why They Matter
Dialed-in Cura settings for PETG filament: nozzle temp, retraction, speed, fan, and flow calibration with exact values for direct drive and Bowden setups.
-
Pressure Advance Settings: OrcaSlicer, PrusaSlicer and Cura
Find pressure advance in OrcaSlicer, PrusaSlicer and Cura, choose the correct profile or start G-code location, and check which value reaches the printer.
-
Import Cura Profiles Into OrcaSlicer: Step by Step
Import Cura profiles into OrcaSlicer by rebuilding the settings: learn the format limits, map Cura terms, and save printer, filament and process presets.
-
Ironing: How to Get Glassy Flat Top Surfaces
Ironing smooths flat top surfaces by re-running the nozzle over them with a trickle of filament. How it works, the four settings, and when to skip it.
-
Slicer Comparison: Which 3D Printing Slicer Should You Use?
Choose a 3D printing slicer by printer support, material workflow and profile needs, then use focused comparisons to decide between your final two.
-
Lightning Infill: What It Is, When to Use It, Settings
Lightning infill only props up top surfaces: it saves filament on display prints but adds little strength. When to use it, plus Bambu Studio settings.
-
Seam Placement: How to Hide the Z-Seam on FDM Prints
The guide compares corner, random, aligned, and painted seam modes, then explains how retraction, wall order, and pressure advance affect seam quality.